best atv crossbow mount

Imagine you’re out deep in the woods, ready for a long day of hunting, and your crossbow is slipping around on your ATV’s rack. You need a reliable way to keep it secure without fussing with complicated straps or risking scratches.

That’s where the KEMIMOTO ATV Tool & Hunting Rack comes into play.

This mount is surprisingly sturdy, with a solid steel core covered in soft rubber that protects your gear from scratches. It has a thick rubber coating and fins that mold around your crossbow or tools, holding everything tightly even on bumpy terrain.

The rubber straps are flexible and can fit into different notches, giving you peace of mind that your gear won’t bounce off while you’re bouncing down a rough trail.

What really makes it stand out is how easy it is to install. You just slide the U-type mount through the rack’s hole, tighten the nuts—no extra tools needed—and you’re set.

It fits handlebars and round bars from 0.8 to 1.3 inches in diameter, so you can mount it pretty much anywhere on your ATV or even on snowmobiles and treestands.

Using it on a hunting trip, I noticed how stable my crossbow was, thanks to the fins and rubber straps. Even on uneven ground, it stayed put.

Plus, the design is sleek enough not to get in the way or look out of place.

For $24.99, it feels like a smart investment for anyone needing a versatile and dependable mounting solution. It’s simple, effective, and built to last through rough adventures.

The first time I clipped this ATV & Scooter Tool Holder Rack onto my handlebars, I was surprised by how solid it felt in my hand. The thick rubber coating immediately caught my attention—it looks durable but also flexible enough to grip uneven surfaces.

As I slipped it onto a round bar about an inch in diameter, the adjustable fins clicked into place easily. I appreciated how snugly it fit without feeling too tight or flimsy.

Securing my crossbow with the rubber straps was straightforward; they snapped into notches and held everything tightly, even when I hit some rough patches.

The fins contour well to different gear, which makes it versatile for not just crossbows but other tools like shovels or fishing poles. I tested it on a variety of vehicles—ATV, mobility scooter, and even a snowmobile—and it adapted easily.

Installation was quick, and I liked that I could move it around the handlebars or any round bar from 0.8 to 1.3 inches.

What really stood out is how secure my gear felt during a bumpy ride. The rubber straps didn’t slip or loosen, even at higher speeds.

It’s a simple yet effective solution for keeping your gear within reach without worries. For the price, it delivers a lot of bang for your buck.

One thing to keep in mind is to double-check your bar size before buying. It’s sold as a pair, so you can mount two tools or crossbows, which is great for multi-gear setups.

Overall, it’s a handy, rugged mount that makes outdoor with your ATV much more convenient.

The moment I clipped the KEMIMOTO ATV Double Tool Holder onto my quad, I immediately noticed its thick rubber coating. It’s like a shock absorber for my gear, drastically reducing vibrations when I hit rough patches.

This feature alone makes a noticeable difference in keeping my bows and shovels steady and secure.

The holder’s ability to tilt into a 45-degree position is a game-changer. I can adjust the angle to fit different gear sizes or terrain conditions without worrying about it toppling over.

Plus, the extended height keeps everything well above the edge, so I don’t have to worry about gear sliding off during a bumpy ride.

Installing it was surprisingly straightforward. I used the versatile mounting options, attaching it to both round and square bars with ease.

The internal locking fins and rubber snubbers really lock my gear in place, so I feel confident nothing’s going to fall off, even on sharp turns or steep inclines.

What I also appreciate is its wide compatibility. Whether I’m on my ATV, snowmobile, or even hunting bike, this double holder adapts seamlessly.

It’s perfect for holding my bows, fishing poles, or shovels, making it a true multi-tasker on the trail.

Sure, I need to be mindful not to overload it in full tilt mode—20kg max. But overall, it’s sturdy, flexible, and reliable.

For anyone serious about keeping gear secure during rugged adventures, this is a solid upgrade.

The moment I clipped my crossbow into the KEMIMOTO ATV & Hunting Tool Holder, I noticed how snug and secure it felt, thanks to the rubber straps. That thick rubber coating over the nylon core really dampens shocks, so I wasn’t worried about my gear bouncing around on rough trails.

It’s surprisingly versatile—able to tilt up to 45 degrees, which makes for easy access without risking a fall.

Mounting it was straightforward. Whether I attached it to a tubular bar or a flat surface, the adjustable clamps held tight.

I tested it on a few different vehicles—ATV, snowmobile, even a hunting bike—and it stayed rock solid, even over bumpy terrain. The extended height feature keeps gear up from the edge, making it even easier to grab my bow or shovel without crouching.

Plus, the rubber snubbers keep everything from slipping or rattling loose.

What really impressed me is how much weight it can handle—up to 20kg—yet remains steady. I loaded it with a variety of gear, from fishing poles to ice augers, and not once did I worry about it tipping or sliding.

The wide application makes it a true multi-tasker, perfect for hunting, farming, or even snowmobiling. The only caveat: avoid fully tilting with heavy objects, as it’s best for lighter gear in that position.

Overall, this tool holder feels sturdy, adaptable, and built to survive the bumps of outdoor adventures. If you need a reliable mount that keeps your gear secure and accessible, this one’s definitely worth considering.

As I reached for my crossbow on the back of my ATV, I noticed just how smoothly this mount rotates. With a quick flick of the wrist, I spun the rack 180°, positioning my gear exactly where I needed it without any fuss.

The rubber pads made sure it stayed put, no slipping or rattling during my ride.

The mount’s build feels solid in your hand, thanks to heavy-duty forged steel that screams durability. I appreciated how versatile it is—fitting both round and square tubes from 16 to 38mm—so I could attach it to my ATV, UTV, or even my golf cart.

Plus, the 360° rotation and adjustable sides meant I could customize the angle for quick access or to clear obstacles.

Installing was a breeze. The instructions were clear, and all the necessary tools were included.

I mounted it on a vertical bar, and the rubber spurs helped lock everything securely in place. It’s lightweight enough to handle easily but sturdy enough to hold my crossbow and hunting tools firmly.

Overall, it feels like a reliable addition to my gear, especially for quick, on-the-go access during hunting trips.

One thing I noticed is that the rubber outer is resistant to scratches, which keeps my equipment and vehicle surfaces safe. The flexible design means I can adjust or remove it in seconds, which is a real plus when I need space for other gear.